10.
Register the scan settings as needed.
Output Settings
•
Select [Email], [Shared Folder], [FTP], [Cloud] or [SharePoint] as the output method.
•
If Shared Folder or FTP is selected as the output destination, a folder path from the list registered in
the Server tab should be selected.
•
If "Cloud" or "SharePoint" is selected as the output destination, a folder path configured within the
Image Capture Plus should be selected.
Scan Settings
•
Select the setting from Scan Settings List.
•
You can register the setting on this screen, too.
Note
If you need to change the advanced settings, click
11.
Click [Submit] to apply the settings, and then click [Back].
•
Make sure the list has been added.
Scan the documents
•
Operate the scanner as follows.
1.
Press the Skip/Menu button (
2.
Use
or
of the cursor button to select a Preset Group.
3.
Use
or
of the cursor button to select a Preset Scan setting list.
4.
Place the documents on the feed tray.
5.
Press the Start/Stop button (
•
If [Confirm Output Path] of Preset Scan setting is enabled, the output path will be displayed on the
LCD. Confirm the output path, and then press the Start/Stop button (
•
If [Confirm Output Path] of Preset Scan setting is disabled, scanning will start.
) to select Preset Scan mode.
) to start scanning.
6.4.5 Preset Scan mode
in [Advanced Settings].
) again.
63