Installing A Self-Signed Certificate - Panasonic KV-S1058Y Operating Manual

Enabling SSL/TLS
1.
Launch Configuration Web.
•
For details, refer to "8.1 Launch Configuration Web" (page 66).
2.
Open the [Network] tab.
3.
Click [SSL/TLS].
4.
In "Setup", click [Edit].
5.
Set "Service" to [On].
6.
Click [Submit].
•
Turn the unit's power off and then on again.

11.4.2 Installing a self-signed certificate

1.
Launch Configuration Web.
•
For details, refer to "8.1 Launch Configuration Web" (page 66).
2.
Open the [Network] tab.
3.
Click [SSL/TLS].
4.
In "Create CRT Key", click [Edit].
•
You can not create a CRT key if Self-signed Certificate or Security Certificate is enabled.
5.
Click [Submit].
•
Do not operate the browser until creation of the CRT key is complete. While the CRT key is being
created, screen updates and network communication may be slow.
6.
Click [Back].
7.
In "Self-signed Certificate", click [Edit].
8.
Click [Submit].
9.
Click [Back].
10.
In "Setup", click [Edit].
11.
Set "Service" to [On].
12.
Click [Submit].
•
Turn the unit's power off and then on again.
11.4.2 Installing a self-signed certificate
107