Panasonic KV-S1058Y Operating Manual page 29

Item
LCD Contrast
Roller Cleaning
Notification
Roller Replacement
Notification
Glass Cleaning
Notification
Select Counter
Home Screen
Counter
Select the counter using
The types of selectable counters are shown below.
Setting contents
Item
Scan Counter
System Counter
After Clean Roller
Counter
After Replace Roller
Counter
Clear Clean Roller
Counter
Clear Replace Roller
Counter
Clean Roller Timing
Replace Roller Timing
Network Setting
Setting contents
Item
Network Status
DHCP
Set the LCD contrast (5 levels).
Enable (On) or disable (Off) the roller cleaning notification.
Enable (On) or disable (Off) the roller replacement notification.
Enable (On) or disable (Off) the scanner's internal cleaning notification
function.
Select the counter from [Scan] or [System] that appears on the Home screen
and the screen displayed during scanning.
Select whether to display [USB Job] or [Preset] on the Home screen.
or of the cursor button, and press the OK button to complete your selection.
The number of documents scanned during the scanning process. The scanned
quantity is cleared each time you start scanning.
The number of documents scanned by the scanner since it was shipped from
the factory.
The number of documents scanned since clearing the counter after cleaning
the rollers. Clear after cleaning the rollers.
The number of documents scanned since clearing the counter after replacing
the rollers. Clear after replacing the rollers.
Set the After Clean Roller Counter to zero (0).
Set the After Replace Roller Counter to zero (0).
Displays the number of documents that can be scanned until the roller
cleaning notification appears.
Displays the number of documents that can be scanned until the roller
replacement notification appears.
Display the network status.
Enable (On) or disable (Off) DHCP.
Contents
Contents
Contents
5.3 Menu screen
29