Panasonic KV-S1058Y Operating Manual page 30

5.3 Menu screen
Item
AutoIP
IP Address
Subnet Mask
Default Gateway
DNS Server 1
DNS Server 2
WINS Server 1
WINS Server 2
HTTPd
Host Name
*1
MAC Address
For details, refer to "8.2.1 Available characters in Configuration Web" (page 68).
*1
Maintenance
Setting contents
Item
Cleaning Mode
30
Enable (On) or disable (Off) Auto IP. If DHCP is disabled, this setting cannot
be changed. This setting can also be changed from Network Setting Tool
(page 103).
Set the IP address. If DHCP is enabled, this will be set automatically and
cannot be changed. This setting can also be changed from Network Setting
Tool (page 103).
Set the subnet mask. If DHCP is enabled, this will be set automatically and
cannot be changed. This setting can also be changed from Network Setting
Tool (page 103).
Set the default gateway. If DHCP is enabled, this will be set automatically and
cannot be changed. This setting can also be changed from Network Setting
Tool (page 103).
Set the primary DNS server.
Set the secondary DNS server.
Set the primary WINS server.
Set the secondary WINS server.
Enable (On) or disable (Off) the HTTPd.
If HTTPd is disabled, "Configuration Web" is not available.
Set the host name for the scanner (up to 15 characters).
Display the scanner's MAC Address.
Start Cleaning Mode. For details, see "10.2.4 Cleaning Mode" (page 91).
Contents
Contents