Transporting The Device; Cleaning The Device; Energy Saving, Disposal And Recycling - Fujitsu ESPRIMO K55x/24 Series Operating Manual

Transporting the device

Re-transportation Transportation Device
Transport all devices separately in their original packaging or in a packaging
that protects them from knocks and jolts.
Unpack them only at the installation site.
If the device is brought from a cold environment into the room where it will be used,
condensation may occur. In order to avoid damage to the device, wait before preparing
it for use until the device has reached the ambient temperature and it is absolutely dry.

Cleaning the device

Device, Transportation System unit,see Device Retransportation
Turn off all power and equipment switches and disconnect the power
plug from the mains outlet.
Do not clean any interior parts yourself, leave this job to a service technician.
Do not use any cleaning agents that contain abrasives or may corrode
plastic (alcohol, thinner or acetone).
Never clean the device with water! Water entering into the device could
present a serious risk to users (e.g. electric shock).
Ensure that no liquid enters the system.
The surface can be cleaned with a dry cloth. If particularly dirty, use a cloth that has been
moistened in mild domestic detergent and then carefully wrung out.
Use disinfectant wipes to clean the keyboard and the mouse.

Energy saving, disposal and recycling

Disposal Energysaving Recycling
You can find information on these subjects on the Recovery DVD or on our website
("http://www.fujitsu.com/fts/about/fts/environment-care/").
Fujitsu
Important notes
13