Model Description - Hatco HWBI Series Installation And Operating Manual

English
All Models
All Modular Built-In Heated Well units are reliable and versatile.
Each unit has an insulated, stainless steel and aluminized steel
housing with a metal sheathed heating element available in
low or standard wattage. The heating element is controlled
with a thermostatic temperature control and a lighted POWER
ON/OFF switch housed in a remote control enclosure. The
remote control enclosure is connected to the unit with a 6'
(1829 mm) flexible conduit assembly. Modular Built-In Heated
Wells are hardwired directly to a power source for a secure and
cord-free serving area.
All models are equipped with EZ locking hardware and designed
to be mounted to the topside of a non-combustible countertop.
Modular Built-In Heated Wells are designed, manufactured,
and tested to maintain safe food holding temperatures.
HWBI-1, -2, -3, -4, -5, and -6 Models
HWBI models are capable of holding a variety of pan
combinations in each heated well.
• One full size pan
• Two 1/2-size pans with adapter bars.
• Three 1/3-size pans with adapter bars.
• Six 1/6-size pans with adapter bars.
• Two 7 quart round pans with adapter top.
• Three 4 quart round pans with adapter top.
Food Pans, Pan Support Bars, and Adapter Tops sold
separately (refer to the OPTIONS AND ACCESSORIES
section in this manual).
HWBI-1
HWBI-2
Form No. HWBIM-0319
IMPORTANT NOTE
Remote control enclosures must be
mounted on the front of the unit to
ensure the controls correspond with the
correct wells (the front of the unit is the
side the conduit enters under the unit).
Remote control enclosures cannot be
rewired and must be installed in the
proper location.
HWBI-3
HWBI-5
HWBI Models
HWBI-1D, 2D, -3D, -4D, -5D, and -6D Models
HWBI-XD models have the same capabilities as the HWBI-X
models but are equipped with a separate drain in each
well. Each drain includes a 3/4" NPT drain fitting and a flat
drain screen that allows for pans to stay level for consistent
temperatures.
HWBI-1DA, -2DA, -3DA, -4DA, -5DA, and -6DA
Models
HWBI-XDA models have the same capabilities as the HWBI-XD
models but are also equipped with the Auto-Fill feature.
NOTE: Auto-Fill will fill only the left-hand well. To fill all wells,
drains must be connected to a manifold.
HWBI-2M, -3M, -4M, -5M, and -6M Models
HWBI-XM models have the same capabilities as the HWBI-X
models but are equipped with a manifold drain assembly. The
manifold drain assembly is equipped with a 1" NPT drain fitting.
Each well connected to the manifold drain assembly includes a
flat drain screen that allows for pans to stay level for consistent
temperatures.
HWBI-2MA, -3MA, -4MA, -5MA, and -6MA
Models
HWBI-XMA models have the same capabilities as the HWBI-XM
models but are also equipped with the Auto-Fill feature.
NOTE: HWBI-4, HWBI-5, and HWBI-6 models for Canada
have all controls in a single control enclosure.
*
* HWBI-4, HWBI-5, and HWBI-6 models for Canada
require all controls in a single control enclosure.
5

MODEL DESCRIPTION

*
HWBI-4
HWBI-6
*