Normal Mode - CDVI Digicode Series Installation Manual

INSTALLATION MANUAL
GALEOR
Illuminated RF keypad
8] FACTORY RECOVERY
To avoid any damage action ( intentional or not ) the factory recovery can be carried out only by the owner
of the 5-digit Master code or knowing any User code memorized ( with 4 or 5 digits) .
according to that and the final purpose of the recovery, follow the procedure "a+1" or "B+3".
noTE : at the end of procedure "B+3", even the user code typed within the procedure will be deleted and
the keypad must be memorized again onto the corresponding receiver.
12
cdvigroup.com
FACTORY RECOVER
Master code reset
to factory value
12345
A+1
SIMULTANEOUSLY
FOR 30 SECONDS
2 beeps
Within 20 sec.
type the digits of a
memorized code
3 beeps = OK
Doesn't affect Deletes all User codes memorized
the user codes
memorized
resets the Master code to 12345.

Normal mode

Recover to
factory settings
B+3
SIMULTANEOUSLY
FOR 30 SECONDS
2 beeps
Within 20 sec.
type the digits of a
memorized code
4 beeps = OK
on the keypad, recovers the
choice to 4 or 5 digits, deletes
the link with the receiver and
EN