Window Picture Adjustment Bar; Query - Dahua ITC215-PW4I-LZF27135 User Manual

Parameter
Snap Line
Shielded
Area
Optimal
Plate
Draw lines on the view interface.
Click Redraw to delete config line one by one.
Adjust the vehicle snapshot location to yellow box.
Try to make sure the location and size of plate is in accordance with that of the yellow
line box.
Plate optimal width rangevalue is from 140 to 160, If it needs to be modified, go to
Setting > Smart Traffic > Smart Parameter >Smart Analysis > Recognition Config and
make setting.
Set Local Character. Set local character according to the device location.
Set Built-in NO Brightness. Drag the block and set brightness of NO light according to
actual requirement.
Click OK to finish configuration.

5.2.4 Window Picture Adjustment Bar

Select the picture display mode of the live interface.
Icons

Query

Click Query tab and the system displays query interface where users can inquire picture and
record info.
Note
Draw the detection line which triggers video capture, it is as functional as the
line in traffic. It will trigger and take snapshot when the vehicle crosses the
detection line.
Snap line is displayed as green line.
Set the area range which needs to be shielded. LPR is not implemented within
the shielded area. It supports setting max two shielded areas.
Area line is displayed as gray box.
Click it and drag the yellow plate pixel box to proper location on the video
interface.
Window Picture Adjustment Column
Table 5-8 Window picture adjustment
Name Note
View the pixel of selected area and it can be used to check
Selected window
plate width.
Single window Display the picture with one window.
Four window Display the picture with four windows.
Full screen
Display the picture with full screen.
window
WEB Client 33