Faq - Dahua ITC215-PW4I-LZF27135 User Manual

FAQ

Device error. Failed to
normally operate or start.
Storage card hot swap
Write times limit of
storage card
Failed to use disk for
storage
Network upgrade failed
TF card recommended
type
Failed to pop up the
installation dialog box of
WEB control
webrec.cab.
Table 7-1
Measures
Press the Reset button for 5 seconds and make the device restore
to default setting.
Please stop recording and snapshot before removing storage
card. Operation can be made after 15 seconds in order to
guarantee data completeness; otherwise it may cause the danger
of data loss.
Please do not set the storage card as the storage media of
scheduled record, otherwise it will rapidly reach the write longevity
and cause damage to the storage card.
When the storage card shows sleep mode or 0 capacity, please
first format it via WEB interface.
When network upgrade fails, the status indicator light shows red.
At this moment, upgrade can be continued via port 3800.
Kingston 16GB, Kingston 32GB, Kingston 64GB, Dahua 16GB,
Dahua 32GB, Dahua 64GB. It is recommended to use class 10
high capacity card, which supports max 128G TF card.
Please set the security level of IE browser as Low, Active Plug-in
and Control is set as Enable.
7
FAQ
FAQ 99