Cleaning The Milk Frother - V-ZUG SUPREMO XSL Operating Instructions Manual

8 Care and maintenance
Inserting the infuser
▸ If necessary, compress the infuser 1 to the right size.
▸ Slide the infuser 1 on to the pin 2 of the support.
▸ At 3, depress the infuser until the infuser 1
clicks into place.
▸ Make sure the yellow release buttons 4 have
snapped out.
▸ Put back the drip tray 5.
▸ Close the service door 6.
8.11

Cleaning the milk frother

Small parts may present a choking hazard!
Keep the individual parts of the milk frother out of the reach of children!
Cleaning the internal tubes
Danger of burns!
Hot water and steam come out of the milk spout. Be careful to avoid any splashes!
▸ Place a cup under milk spout 1.
▸ Turn the adjusting knob 2 to position
– The internal tubes are cleaned.
– In the display appears: «Cleaning milk frother un-
derway – Place a receptacle under milk spout»
– A bar in the display gradually fills in as preparation
progresses.
– The cleaning process ends automatically.
▸ Turn the adjusting knob 2 to a position for the milk
froth quantity.
▸ Remove the milk frother 3.
▸ Clean the connection nozzle (see page 38).
36
2
6
CLEAN
.
INSERT
1
4
3
5
2
1
3
1