5.7
Milk froth / steam delivery
Danger of burns!
The appliance produces steam! Do not leave the appliance unattended while milk
froth is being produced or liquids are being heated.
▸ If the appliance is switched off: Switch the appliance
on (see page 14).
▸ Slide the hot-water/steam spout 1 on the connection
nozzle 2.
▸ Fill a jug with the required quantity of liquid.
For milk froth: Do not fill the jug more than a third full
with milk because frothing can make the milk triple in
volume.
▸ Place the jug under the hot-water/steam spout 1.
▸ Immerse the hot-water/steam spout 1 in the liquid.
▸ Touch
or
repeatedly until «Steam» appears in the
display.
▸ Touch «Steam».
– Steam comes out of the hot-water/steam spout 1.
– A bar in the display gradually fills in as preparation
progresses.
▸ When the desired temperature or level of froth is
reached, touch .
▸ Clean the hot-water/steam spout 1 after use (see
page 38).
Tips for making milk froth
▸
For a denser froth, use skimmed or semi-skimmed milk (about 5 °C).
▸
For a creamier froth, as the steam is being delivered, rotate the jug with slow
movements in an upward motion.
▸
For froth without large bubbles, always clean the hot-water/steam spout 1 after
use.
5 Making beverages
2
1
25