Cleaning The Hot-Water/Steam Spout; Cleaning The Connection Nozzle; Descaling - V-ZUG SUPREMO XSL Operating Instructions Manual

8 Care and maintenance
8.12

Cleaning the hot-water/steam spout

Small parts may present a choking hazard!
Keep the individual parts of the hot-water/steam spout out of the reach of children!
▸ Remove the hot-water/steam spout and disassemble
the individual parts.
▸ Clean the individual parts in the dishwasher or with
hot water and a mild detergent.
▸ Make sure that there are no milk residues stuck to
the individual parts.
▸ Reassemble the individual parts when dry.
8.13

Cleaning the connection nozzle

▸ Wipe away any milk residues from the connection
nozzle 1 with a sponge dampened with water.
8.14

Descaling

How descaling functions
Whenever steam is produced, depending on the hardness of the local water supply (i.e.
the limescale content of the water), limescale is deposited in the boiler. A system in the
appliance automatically detects when descaling is necessary and indicates this
whenever the appliance is switched on with the following message:
«Descaling necessary. Press
We recommend descaling the appliance whenever the message appears in the
display. Continued failure to descale the appliance will likely impair its functions or
cause damage to the appliance. Descaling takes about 45 minutes.
Descaler
Using the wrong descaler can damage the appliance!
Always use the descaler recommended by the manufacturer. The use of an unsuit-
able descaler can cause damage to the appliance which does not fall within the
scope of the manufacturer's guarantee. Follow the manufacturer's instructions.
38
to start (~45 mins.)»
1
25%