Rinsing; Descaling; Water Softener Filter; Drinks Settings - V-ZUG SUPREMO XSL Operating Instructions Manual

7 User settings
7.3

Rinsing

With this user setting, the internal circuit of the appliance can be cleaned or the infuser
heated.
▸ Follow the instructions in the «Cleaning the internal circuit» section (see page 32).
7.4

Descaling

The appliance can be descaled with this user setting.
▸ Touch .
– The user settings menu appears in the display.
▸ Touch the or
▸ Touch .
▸ Follow the instructions in the «Starting descaling» section (see page 39).
7.5

Water softener filter

The following applications are available with this user setting:
▪ Insert (see page 16) and enable (see page 17) the water softener filter
▪ Replace (see page 18) the exhausted water softener filter
▪ Permanently remove (see page 19) the water softener filter
7.6

Drinks settings

It is possible to display and reset the drinks settings for each profile.
▸ Touch the current user profile, e.g. profile 1 , on the display.
– The user profiles menu appears in the display.
▸ Touch or repeatedly until the desired profile appears in the display.
▸ Select the desired profile, e.g. profile 2 .
▸ Touch in the display.
▸ Touch or repeatedly until the user setting «Drinks settings»
play.
▸ Touch .
– The espresso drinks settings appear.
▸ Touch repeatedly until the drink to be reset is displayed.
▸ To cancel, touch
▸ To reset the drinks settings for profile 2, touch
7.7

Setting the time

The time shown in the display can be changed.
7.8

Auto-start

When this user setting is enabled, a time can be set for the appliance to switch on auto-
matically (e.g. every morning). This requires that the correct time be entered in the user
setting «Time». When this user setting is enabled,
user setting is disabled by default.
7.9

Automatic shut-off

If no drinks are being delivered but the appliance is switched on, it will turn off automatic-
ally after a set time if there is no user interaction. The automatic shut-off can be set
between 15 minutes and 3 hours; the default setting is 30 minutes.
28
button until the user setting
.
appears in the display.
.
appears on the start screen. This
appears in the dis-