Filling The Beans Container; Adjusting The Coffee Mill - V-ZUG SUPREMO XSL Operating Instructions Manual

4.3

Filling the beans container

Do not use green, caramelised or candied coffee beans or the like. They could
clog up the coffee mill and damage it.
▸ Twist open the lid 1 of the beans container.
▸ Fill the beans container 2 with coffee beans.
▸ Close the lid 1 of the beans container.
4.4

Adjusting the coffee mill

The coffee mill is set by default to prepare coffee correctly the first time you use the
newly installed appliance. If the coffee being prepared is too weak or not creamy enough
or is being delivered a drop at a time, the coffee mill can be adjusted manually.
Incorrect handling can result in damage to the appliance!
The adjusting knob for the coffee mill may only be turned when the coffee mill is in
operation. The appliance must remain pulled out for this.
▸ Open the lid 1 of the beans container.
▸ Make the desired coffee drink (see page 20).
▸ While the coffee mill 2 is in operation, turn the adjust-
ing knob for the coffee mill one position to the left or
right.
▸ Make at least 2× the desired coffee drink using the
new coffee mill setting.
– The effect of the new coffee mill setting will be ap-
parent after a third cup of coffee is delivered.
▸ If the new coffee mill setting does not produce the
desired result, turn the adjusting knob 2 for the coffee
mill to the next position.
Cause
▪ Coffee is too weak
▪ Coffee is not creamy
enough
▪ Coffee is delivered a
drop at a time or too
slowly
Adjusting knob Solution
▸ Turn the adjusting knob for the coffee
▸ Turn the adjusting knob for the coffee
4 Operating the appliance
1
1
2
mill anti-clockwise one position (to-
wards «1»).
mill clockwise one position (towards
«7»).
2
15