Powering Off And On - Xerox AltaLink C80 Series Features

The following Power Off options are available:
Sleep: Sleep Mode is a power saving state that extends the device's energy saving capability.
Restart: The device restarts. Any jobs in progress are deleted.
Power Off: The device powers off. Any jobs currently in the print queue are deleted.
Cancel: Power off options are cancelled and the device is available for use.
Any jobs in the queue are retained.
1. Powering Off:
Press the Power button.
NOTE: It is advisable to leave the device powered
ON at all times, but it may be necessary to
power off the device for example if a
problem occurs or to move the device.
2. Powering On
1. Open the front cover,
2. Press the switch ON
MFP]
3. Close the front cover.
4. Press the Power button located on the Control Panel.
5. The device powers up and is ready to print, scan or copy (Standby Mode).
Low Power Mode:
 To reduce energy consumption, the device is pre-set at the factory to enter a
 The
Power button is illuminated when the device is in
 To re-activate the device from
XEROX C8000

Powering OFF and ON

the [right hand side of the
Low Power Mode, press the
Low Power Mode.
Power button.
1
2
Low Power Mode.