Advertisement
1.088 [27.6]
0.507 [12.9]
1.732
[44.0]
0.507
0.140 [3.6]
[12.9]
1.406 [35.7]
0.140 [3.6]
0.391
0.250 [6.4]
[9.9]
MAX MOUNTING
TORQUE:
2 IN.-LBS (0.23 N x m)
SEE DETAIL "A"
0.140 [3.6]
0.125 [3.2]
0.066 [1.7]
0.133 [3.4]
NOTES:
1. MATERIAL:
2. FINISH:
3. MODULE IS KEYED AS SHOWN IN DETAIL
4. DIMENSIONS ARE IN INCHES, [DIMENSIONS IN BRACKETS
5. TOLERANCES (UNLESS OTHERWISE SPECIFIED):
6. TO DISABLE FORCED SHUTDOWN UPON FAN
7. FOR CONVECTION COOLING, DISCONNECT FAN AND
3010294
KEPCO, INC. 131-38 SANFORD AVENUE FLUSHING, NY. 11355 U.S.A. TEL (718) 461-7000 FAX (718) 767-1102
021219
0.191 [4.9]
0.190
[4.8]
0.503 [12.8]
0.282 [7.2]
0.228 [5.8]
0.156 [4.0]
1.474 [37.4]
0.250 [6.4]
4.295 [109.1]
0.437 [11.1]
0.780 [19.8]
3.960 [100.6]
A) BACKPLATE 0.064" THK. ALUM. 5052-H32
B) PCB 0.063" THK FR-4
C) FRONT PANEL 0.090 THK. ALUM. 6061-T6
FRONT PANEL -KEPCO DUAL TONE GRAY
ARE IN MILLIMETERS].
3 PLACES: ±0.005, 2 PLACES: ±0.01, FRACTIONS: ±1/64"
FAILURE, INSERT JUMPER (P/N 172-0382) AS
SHOWN IN DETAIL "B."
INSERT JUMPER (P/N 172-0382) AS SHOWN IN DETAIL "B."
FIGURE 7. HSF-1UR 150W POWER SUPPLY OUTLINE DRAWING
http://www.kepcopower.com email: hq@kepcopower.com
14.131 [358.9]
0.125 [3.2]
13.050 [331.5]
4.275 [108.6]
SEE DETAIL "B"
0.140 [3.6]
1.108 [28.2]
0.471 [12.0]
1.732 [44.0]
0.076 [1.9]
0.010 [0.3]
1.131 [28.7]
228-1621 REV 8
0.129 [3.3]
0.303 [7.7]
3.755 [95.4]
JP1
0.260 [6.6]
0.750 [19.1]
1.125 [28.6]
0.591 [15.0]
DETAIL "A"
KEY PIN LOCATION
48 VOLTS
28 VOLTS
24 VOLTS
15 VOLTS
12 VOLTS
5 VOLTS
3.3 VOLTS
JP1
FAN
CONNECTOR
INSERT JUMPER J1
DETAIL "B"
0.690 [17.5]
7
Advertisement
