Dmz (Router Mode Only) - Buffalo WCR-HP-GN User Manual

Chapter 4 Configuration
Parameter
LAN Side IP Address
LAN Side Port
Port Forwarding Registration
Information

DMZ (Router Mode only)

Configure a destination to transfer communication packets without a LAN side destination to.
Parameter
IP Address of DMZ
WCR-HP-GN User Manual
Meaning
Enter the LAN side IP address (after translation) for the port
translation table entry.
Select the LAN side (after translation) port number (1 - 65535) for
the port translation table entry.
Shows current entries in the port translation table.
Meaning
Enter the IP address of the destination to which packets which are
not routed by a port translation table are forwarded.
Note: RIP protocol packets (UDP port number 520) will not be
forwarded.
57