Buffalo WCR-HP-GN User Manual page 21

Chapter 3 Installation
Manual Settings
Select [Manual] from [Connection type]. Then click [Search].
11
A list of available wireless APs will be generated. Select the target AP and click [Select].
Click [Search again] if no APs are found.
12
Configure the security settings to match that of the target AP, then click [Apply].
13
Revert your computer's IP address settings to their original values as scribed in Appendix C
(page 95).
ex) IP address
Subnet mask
WDS setup is complete. Refer to Chapter 4 for advanced settings.
WCR-HP-GN User Manual
obtain an IP address automatically
obtain DNS server address automatically
20