Wds (Bridge Mode Only) - Buffalo WCR-HP-GN User Manual

Chapter 4 Configuration

WDS (Bridge Mode only)

Configure the settings for WDS bridging here. Refer to page 15 for the WDS setup process.
Note: You cannot specify WDS while the device is in the router mode.
Change the mode to bridge on TOP screen to display WDS configuration screen.
Parameter
WDS
Connection type
WCR-HP-GN User Manual
Meaning
Enable to use WDS.
Select how you want to configure WDS.
Manual
Enter the target wireless AP's SSID and security information
manually.
AOSS
Connect with the AirStation using AOSS. If this option is selected,
a special AOSS button will appear. This button can be used for
WDS connection only. Once AOSS connection is set up, the WCR-
GN will have the same security setting as the other AP in the
bridge. Refer to page 15 for setup directions.
50