Setting Send Mode - Buffalo AirStation WLA-L11G User Manual

Set the AirStation's LAN board send mode using the following procedure.
1
Refer to the "Displaying AirStation Setting Screen" section (page 29) in Chapter
2, What is Next?, and display the AirStation setting screen.
2
3
When the AirStation's send mode is set to full duplex, make sure that the send
mode for the connected hub is also set to full duplex. When the send mode for the con-
nected hub is set to Auto Negotiation and half duplex, and the AirStation's send mode is
set to full duplex, communications will be disabled.
Follow the screen instructions to complete the settings.

Setting Send Mode

Click the Custom Setup button.
In the "Communication Type" field, select
either full duplex or half duplex, and click the
Set button.
WLA-L11 User's Manual 36