Wds - Buffalo AirStation Nfiniti WLAE-AG300N User Manual

Chapter 4 Configuration

WDS

WDS bridging allows communication between AirStations.
Parameter
WDS
Specify Master/Slave
WLAE-AG300N User Manual
Meaning
Check to use WDS bridging.
Define this AirStation's role in a WDS bridge.
Master
Set AirStation as a master.
Listen to the Salve or a device set as a slave to connect.
Slave
Set AirStation as a slave.
This can be connected with the AirStation which is set as a master
by using WDS feature only if the Master AirStation supports WDS.
Slave (EC)
Set AirStation as a slave.
This uses Ethernet Converter to connect with the AirStation
which is set as a master, so it can be connected even though
Master AirStation does not support WDS.
Auto
Switch [Master] and [Slave] mode automatically depending on
the network environment.
Note: It does not switched to [Slave (EC)] mode automatically.
41