Set Up And Use A Bluetooth - Palm Pre User Manual

TIP You don't need an on-hold button to put a call on hold. Just tap the mute icon
to mute your end of the line.
• Open the dial pad to enter numbers for navigating phone trees,
responding to prompts, and so on:
• Add a call
• Adjust call volume: Press Volume.
End a call
Do one of the following:
• Tap .
• If a headset is attached, press the headset button.

Set up and use a Bluetooth

Your phone is compatible with many headsets and car kits (sold separately)
enabled with Bluetooth wireless technology version 2.1, with EDR and
®
Stereo (with AVRCP media controls).
After you set up a connection with a Bluetooth headset or hands-free car kit,
you can communicate using that device whenever it is within range and the
Bluetooth feature on your phone is turned on. The range varies greatly,
depending on environmental factors. The maximum is about 10 meters (30
feet).
NOTE You can use a stereo (A2DP-enabled) Bluetooth headset or speakers to
listen to music files on your phone. You cannot, however, use a mono Bluetooth
headset to listen to music files.
18 Chapter 2 : Phone
Tap .
hands-free device
®
1 Open Bluetooth .
2 If the Bluetooth setting at the top of the screen is off, tap
the Bluetooth feature from Off to On.
3 Tap Add device and tap the device name.
4 To use a Bluetooth device with your phone, follow the instructions that
came with the Bluetooth device.
5 To switch to another Bluetooth device while on a call: Tap
the new device name. You can also tap
your phone without the headset.
Off to switch
and tap
Handset or Speaker to use