Siemens SIMATIC S7-1500 Function Manual page 27

③
"Filter"
You can search in the table by selecting specific criteria:
1. Select a parameter from the drop-down list:
2. Enter the value of the selected parameter.
3. Click "Filter".
④
"Topology"
The two websites, "Topology" and "Module information", are linked. A click on "Topology" of
the selected module automatically takes you to this module in the graphic view of the target
topology on the "Topology" website. The module is displayed in the visible area of the
"Topology" website. The device header of the selected module flashes for a few seconds.
⑤
"IP address"
If a link is available, you can use it to access this Web server of the configured device you
selected.
⑥
"Details"
Further information about the selected module is provided in the "Status" and "Identification"
tabs via the "Details" link.
⑦
"Status" tab
The tab contains information about the status of the selected module when a fault or alarm
exists.
⑧
"Identification" tab
The tab contains data on the identification of the selected module.
Note
This tab displays only the data configured offline of the module.
Web server
Function Manual, 01/2013, A5E03484625-01
– Slot
– Name
– Order number
– I-address
– O-address
– Comment
Note
The filter criteria are also retained when you update a page.
To deactivate the filter settings, click "Filter" again.
Websites
3.4 Module information
27