● Setting the language for the web
● Amending user administration
Figure 2-3
Web server
Function Manual, 01/2013, A5E03484625-01
Activate the project languages you want to use and then select up to two languages for
the web. Assign one of the activated project languages to each of the languages for the
web.
You can find additional information in chapter Language settings (Page 16).
User administration in STEP 7
In STEP 7, you manage the user list in the area "Web server > User administration".
The user list provides the following options:
①
–
Create user
②
–
Specify access permissions
③
–
Assign passwords
Users only have access to the options that are permanently linked to the access
permissions.
You can assign different user rights depending on the used CPU and firmware. Rights
that your CPU does not support cannot be activated.
General information
2.2 Configuring the Web server
13