Advertisement
Guide for CNC Carving
Prepare
Attach the CNC bit
(with the cap) as you need.
5
Attach the CNC Bit
1
2
Tighten the screw.
3
Take away the cap.
Tips
The Flat End Mill is usually used for
cutting materials, while the Carving
V-bit is usually used for engraving.
!
Caution
The CNC bits are sharp. Please handle
them carefully and keep them out of
reach of children.
Turn the screw as tight as possible.
16
Advertisement
Need help?
Do you have a question about the CNC Carving and is the answer not in the manual?