Trouble Shooting - Iiyama ProLite TF1534MC User Manual

TROUBLE SHOOTING

If the monitor fails to operate correctly, please follow the steps below for a possible solution.
1. Perform the adjustments described in OPERATING THE MONITOR, depending on the problem
you have. If the monitor does not get a picture, skip to 2.
2. Consult the following items if you cannot fi nd an appropriate adjustment item in OPERATING THE
MONITOR or if the problem persists.
3. If you are experiencing a problem which is not described below or you cannot correct the problem,
discontinue using the monitor and contact your dealer or iiyama service center for further assistance.
Problem
The picture does
not appear.
(Power indicator
does not light up.)
(Power indicator
is green.)
(Power indicator
is orange.)
The screen is not
synchronized.
T h e s c r e e n
position is not in
the center.
The screen is too
bright or too dark.
T h e s c r e e n i s
shaking.
T h e t o u c h
screen shows no
response.
The touch position
does not deviate.
22 TROUBLE SHOOTING
 The AC Adapter is fi rmly seated in the connector.
 The Power Cable is fi rmly seated in the socket of the AC Adapter.
 The Power Cable is fi rmly seated in the socket.
 The Power Switch is turned ON.
 The AC socket is live. Please check with another piece of equipment.
 If the blank screen saver is in active mode, touch the keyboard or the mouse.
 Increase the Contrast and/or Brightness.
 The computer is ON.
 The Signal Cable is properly connected.
 The signal timing of the computer is within the specifi cation of the monitor.
 If the monitor is in power management mode, touch the keyboard or the mouse.
 The computer is ON.
 The Signal Cable is properly connected.
 The signal timing of the computer is within the specifi cation of the monitor.
 The Signal Cable is properly connected.
 The signal timing of the computer is within the specifi cation of the monitor.
 The video output level of the computer is within the specifi cation of the monitor.
 The signal timing of the computer is within the specifi cation of the monitor.
 The video output level of the computer is within the specifi cation of the
monitor.
 The power voltage is within the specifi cation of the monitor.
 The signal timing of the computer is within the specifi cation of the monitor.
 The USB Cable is fi rmly seated in the socket.
 Touch screen driver software is installed.
 The calibration function set up correctly.
Check