Cycle Of Operation - Malmet Energy Saver ES910 Operation, Maintenance And Installation Manual

Bedpan Washer Disinfector - Energy Saver
Detergent Model With Hands Free Operation
Operation, Maintenance and Installation Manual

Cycle of Operation

Stage 1 Flushing / Cleaning
One rotating 180° back spray
Two fixed 60° top sprays
Two fixed urinal sprays
Rinse for 10 seconds
Detergent pump on for 7 seconds to add 30ml of concentrate to pump
Main pump on for 3 seconds to apply detergent
Pause for 40 seconds
Rinse for 10 seconds to wash detergent off
Stage 2 Thermal Disinfection
Steam is delivered into the sealed wash chamber
Steam continues to heat the surface temperature of utensils and chamber to a minimum of 90°C
for 60 seconds
Stage 3 Cool Down Rinse
One 60° fine mist top spray delivers cold water direct from mains.
Utensils are cooled to 55°C for safe handling.
In accordance and complies with:
Cleaning Efficacy
AS 2437-1987, ISO 15883-1, ISO/TS 15883-5
Thermal Disinfection
AS 2437-1987, AS/NZS 4187:2003, ISO 15883-1
Issue 21 Page 11 14 September 2017