Appendix B - Additional Faults Not Detected By Controller - Malmet Energy Saver ES910 Operation, Maintenance And Installation Manual

Bedpan Washer Disinfector - Energy Saver
Detergent Model With Hands Free Operation
Operation, Maintenance and Installation Manual
Appendix B – Additional Faults not detected by controller
Section 1 – Faults
These are other faults that may occur which the controller cannot detect (the controller may however
indicate a fault with the following conditions).
Not Washing Pans
1. Check that the cold water pump is working.
2. Check that there is cold water in the tank.
3. Check sprays.
4. Check bedpan position in door cradle. (Diagram B2)
No Power to Control Box
1. Check main power.
2. Check power to control boards
Leaking water onto the floor
1. Check all hose fittings.
2. Check water levels and water probes.
3. Check pump seals.
4. Check door seal.
Issue 21 Page 23 14 September 2017