Zte ZXV10 W300 User Manual page 17

F 5 C
I G U R E R E A T I N G A
3. Choose a connection type from the Type pull-down list box, as
shown in Figure 6.
F 6 C
I G U R E R E A T I N G A
4. Configure parameters according to the specified network type.
If PPPoE is selected, the WAN connection configuration page is
shown as Figure 7. To create a PPPoE WAN connection, perform
the following operations.
i. Specify the New Connection Name.
ii. Specify the VPI/VCI value (provided by ISP).
iii. Input the Username and Password (provided by ISP).
iv. Leave the other parameters as default.
v. Click the Create button.
F 7 C
I G U R E R E A T I N G A
W A N C
O N N E C T I O N
W A N C
O N N E C T I O N
W A N C
O N N E C T I O N
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 4 - Network Configuration
– 1
– 2
– 3
11