Cutting Height Adjustment - Ferris 400S Series Dealer Setup & Adjustment Instructions Manual

21
Speed Balancing (Tracking) Adjustment
If the rider drifts to the right or left when the ground speed
control levers are in the maximum forward position, the top
speed of each of these levers can be balanced. Only adjust
the speed of the wheel that is traveling faster.
1. Tighten the knob (A, Figure 22) of the faster wheel by 1/2-
turn (clockwise) increments until the rider travels (tracks)
straight.
WARNING
Unsafe Operation Hazard
DO NOT adjust the rider for a faster overall speed
forward or reverse than it was designed.
12
22

Cutting Height Adjustment

The deck lift pedal adjusts the mower cutting height. The
cutting height is adjustable between 1-1/2" (3,8 cm) and
4-1/2" (11,4 cm) in 1/4" (0,64 cm) increments.
To adjust cutting height:
1. Fully depress the deck lift pedal (A, Figure 23) until the
deck lift lock lever (B) locks the deck into the highest
position (transport position).
23
ferrismowers.com