Activating the Embossing function
CanvasWorkspace has a large variety of embossing patterns that can be used immediately.
Activating Embossing patterns on
CanvasWorkspace
a
From a computer, log in to CanvasWorkspace.
(http://CanvasWorkspace.Brother.com)
• New users should create a free account.
b
Click
at the top of the Web page.
c
Click <Premium Function Activation>.
d
Type in the activation code on the included activation
code card, and then click <Activate>.
• The uppercase letters "I" and "O" are not used in the activation
code.
• The activation code is valid for only one login ID for
CanvasWorkspace.
The same activation code cannot be used again.
e
Check the content on the activation confirmation screen,
and if there are no problems, click <Activate>.
Click <OK>, and the activation is complete.
A pattern category for embossing is added to CanvasWorkspace.
For details on using CanvasWorkspace, refer to the "Help" by
clicking
in the upper right of the screen.
3
Activating the Embossing function on the
machine
a
Touch "Premium Functions" on the settings screen.
b
Select "ON" beside "Kit Activation (Emboss)".
• As a default, this function is set to "OFF".
Need help?
Do you have a question about the ScanNCut DX Embossing Starter Kit and is the answer not in the manual?