Brother ScanNCut DX Embossing Starter Kit Operation Manual page 2

Accessories
After purchasing this kit, check the contents.
A
F
A
Embossing mat 12" × 9.5" (305 mm × 241 mm)
B
Template sheet 12" × 12" (305 mm × 305 mm)
C
Scanning support sheet 12" × 12" (305 mm × 305 mm)
D
Metal sheets with self-adhesive protective sheets (silver and brass) 7.9" × 6.1" (200 mm × 155 mm) (thickness 0.1 mm)
E Embossing tool holder
F Embossing tools (diameter 1.5 mm and 3 mm)
G Activation card for access to 50 embossing patterns
H Insertion
I Adjustment sheet for region embossing
*1 These accessories are consumables. After you have used them all, purchase CAEBSMAT1 (embossing mat), CAEBSTS1 (embossing
template sheets), CAEBSSMS1 (embossing silver metal sheets) or CAEBSBMS1 (embossing brass metal sheets). To replace the scanning
support sheet, purchase the CASTCL1 (stencil sheet). For purchase options, contact the retailer where this kit was purchased.
*2 For best results, use the included or purchase the optional ScanNCut metal sheets that have a protective sheet on both sides to avoid
damaging the embossing tools or the cutting machine.
*3 The silver-colored metal sheet is made of aluminum, and the brass-colored sheet is made of copper.
B
G
C
H
Name
*1
*1
*1
D
I
E
*1 *2 *3
2