Installation Overview - Allen-Bradley PowerFlex 755 IP00 Installation Instructions Manual

PowerFlex 755 IP00, NEMA/UL Open Type Drive

Installation Overview

Mounting Kit
Converter (AC Input)
Termination Kit
Inverter (DC Bus)
Termination Kit
Optional for a Frame 8
equivalent. Use only if the
application requires.
Inverter (AC Output)
Termination Kit
Mounting Kit
6
AC Input Drives
A typical IP00 installation for an AC input drive is shown below. See pages
for available kits and ratings.
PE
PE
Sub Panel
PE
(for reference only)
PE
Floor Mounting
Kit
Roll-out Cart
Rockwell Automation Publication 750-IN020D-EN-P - May 2017
Outlet Ducting Kit
R/L1
PE
PE
S/L2
T/L3
DC (+)
DC (+)
DC (-)
DC (-)
PE
PE
8...10
Control Pod
For drive mounting, see page 42.
See publication 750-IN015 for
remote mounting information.
IP00 Frame 8 Drive Assembly
(Inverter & Converter)
Bottom Duct Kit
Bottom inlet duct mounts inside
of the Floor Mounting kit. Both
kits are required for inlet ducting
from the bottom.