Product Summary; Name Of Parts/ Accessories - SMC Networks EX510-GMJ1 Operation Manual

Product Summary

System structure
Connecting to bus
at upper level
(CC-Link)
Power supply
for output
24 VDC
Power supply 24 VDC
for input and
controling GW
Input unit
( )
1 connector
2 inputs type
Input unit
( )
1 connector
1 input type
( )
connecting to
4 sets maximum
The system which realizes wiring saving and distributed
installation by connecting to CC-Link. The signal to CC-Link is
transmitted by GW unit, and the signal to input/output device
which is installed discretely is collected by GW unit.
6
Valve manifold
with SI unit
(
connecting to
4 sets maximum
GW unit
Branch cable
(EX510-FC )

Name of Parts/ Accessories

1
6
)
2 3
8
No. Parts
Communication
1
socket (BUS)
Power supply
2
socket (PWR(V))
Power supply
3
socket (PWR)
GW unit side
4 branch connector
(for input)
GW unit side
5 branch connector
(for output)
6 FG terminal
7 Mounting hole
DIN rail mounting
8
slot
Display/ switch
9
setting part
: For wiring method, refer to "Wring" in the "Operation Manual".
9 10
5
Communication
connector for
4
CC-Link
(1 piece)
7
Accessory
Purpose
Connect to CC-Link line with an accessory
connector for CC-Link ( ).
Supplying power for output instruments such as a
solenoid valve with an accessory connector (
Supplying power for controlling GW and for
input instruments such as a sensor with an
accessory connector ( ).
Connecting an input unit etc. by using branch
cables (EX510-FC ).
Connecting SI unit (manifold valve) etc. by
using branch cables (EX510-FC
Used for grounding
Used when a unit is mounted with two M4 screws.
Used when a unit is mounted to DIN rail.
Sets up the switch on such as LED display and
address, I/O points.
11
Power supply
connector
(2 pieces)
).
).
7