Annex Iii - GE Masoneilan 469 Series Instruction Manual

Annex Ill
CABLE GLAND ACCESSORIES MOUNTING ON ATEX
WITH CABLE ENTRY
CERTIFIED Ex d IIC , Ex tb IIIC
Taper threaded joints in conformance
with ANSI ASME Bl.20.1:
5 threads provided on each part
Y237 ADAPTOR CABLE GLAND ACCESSORIES MOUNTING ON ATEX INSTRUMENTS ONLY
CABLE ENTRY
HOUSING
CERTIFIED II 2 GO
Ex d IIC
Ex tb IIIC
PLUG
HOUSING
2
CERTIFIED II GO
Ex
d I
Ex tb IIIC
© 2018 Baker Hughes, a GE company. All rights reserved.
CABLE ENTRY
CERTIFIED II 2 GO
Ex d IIC
Ex tb IIIC
PLUG
CERTIFIED II 2 GO
Ex d I IC
Ex tb IIIC
IC
ONLY ONE PLUG ALLOWED
B
The plug and the cable entries
can be lubricated with greases
specified in paragraph •special
conditions of use•
IECEx INSTRUMENTS
and
WITH ADAPTOR or REDUCER
CERTIFIED Ex d IIC , Ex tb IIIC
Taper threaded joints in conformance
with ANSI ASME B1.20.1:
5 threads provided on each part
Cemented with •LOCTITE FREINFILET FORT•
or equivalent product with similar efficiency
ADAPTOR or REDUCER
A:
Taper threaded joints in conformance
with ANSI ASME Bl.20.1:
S threads provided on each part
Cemented with •LOCTITE FREINFILET FORT•
or equivalent product with similar
efficiency
B :
Taper threaded joints in conformance
with ANSI ASME Bl.20.1:
5 threads provided on each part
Cylindrical thread joints
In conformance with ISO 965-1/3
Effective threads engaged ≥ 5
Depth of engagement ≥ 8 mm
C:
Taper threaded joints in
conformance with ANSI ASME
Bl.20.1:
5 threads provided on each port
Cylindrical thread joints
in conformance with ISO 965-1/3
Effective threads engaged ≥ 5
Depth of engagement ≥ 8 mm
Cemented with •LOCTITE FREINFILET FORT•
or equivalent product with similar
efficiency.
DWG N° 720017989 REV.A
496 Series Masoneilan Position Transmitter ATEX Instruction Manual I 27
ADAPTOR or REDUCER
CERTIFIED II 2 GO
Ex d IIC
Ex tb I I IC
NOTE : A PLUG CAN NOT
BE MOUNTED ON AN
ADAPTOR OR REDUCER