Assembly And Adjustment - Global Freefit User Manual

1.3 Before you start:
Check for and remove obstacles in path of the table top.
Before first use, the control unit must register the lowest point of elevation. Do a reset as listed in "Section 3.2".
Under normal conditions the system communicates internally and knows the position of each column.
If there are differences in column height, please do a manual reset as listed in "Section 3.2".
1.4 Electrical rating
Electrical rating, input: 120VAC, 50-60Hz, 3.2A. Output 35V.

2. Assembly and Adjustment

2.1 Assembly Instruction
The official assembly instruction can be found with the base components.
It is incumbent upon our customers to ensure that an appropriate combination of table frame and desktop has been specified. Please contact Global Furniture
Group Customer Care with any questions.
2.2 Setup Procedure
CAUTION
- Risk of Electric Shock:
The main power cord must be unplugged during the setup.
To set up the table:
1. Connect the handset to a 3-pin motor/motor house or to Bus cable socket
2. Connect the Bus cable between each motor/motor house.
3. Connect the power supply to the motor/motor house.
4. Assemble the power cord to the power supply.
5. The table is ready for use; connect the power cord to the outlet.
Power Supply
iDrive Bus Cable 2000
globalfurnituregroup.com
Power Cable
Handset
FREEFIT USER GUIDE
5