Global Freefit User Manual page 4

FREEFIT USER GUIDE
WARNING
- Risk of Injury or Death:
1. During the raising or lowering of the table there exists a risk of squeezing or pinching between the moving desktop and fixed objects.
2. The necessary safety margins depend on the greatest type of injury risk that can be predicted. To avoid a risk of squeezing or pinching, the following
safety margins must be complied with. Ensure that there is at least one inch (2.5 cm) safety margin between the table top and items above the
table top. This is to avoid pinching of fingers, for example. As a safety margin for body or head
(especially where children may be present) use a minimum of 16" (41cm) counted from the floor
or from the top of the table feet if that is relevant.
3. During the lowering or rising of the desktop, the operator must ensure that no person or object
risks being harmed by the operation.
4. This tag (at right) should be located on the table during the initial installation.
5. Keep children away from moving parts and underneath the table.
6. The intended use of the table is adjusting a worksurface between sitting and a standing
position. The table is not designed for other uses.
7. The table must only be operated while in an upright position and must under no circumstances
be operated while upside down.
8. The table must not be overloaded. The maximum allowable load is shown on the power supply
label.
9. The table must be operated in a dry, enclosed space, such as an office or similar. Do not operate
outdoors.
10. The table is equipped with a Collision Detection System (CDS). In the event of a faulty
component (i.e. motor or handset), the desktop may move slightly before the safety feature is
engaged. Stay clear of pinch points when the desktop is moving.
11. This table is not intended for use by individuals (including children) with limited physical,
sensory or mental abilities or with a lack of experience and/or lack of expertise, unless they
are supervised by a person responsible for their safety and have received instructions from that
person on how to use the control unit.
12. Children must be supervised at all times to ensure that they do not play with the control unit.
13. The table may not be used to lift people. Do not sit or stand on a table while it is being raised or
lowered.
14. The table must not be structurally or technically altered or modified in any way.
1.2 User information
This column system is rated for commercial use only and is rated for a maximum load of 265 pounds, uniformly distributed (120 kg) including the table top.
The motors may only be used continuously for 1 minute after which the table will automatically shut off for 9 minutes.
Typical Product Label with Date of Manufacture
4
Typical Power Supply Label
globalfurnituregroup.com