Global Freefit User Manual page 6

FREEFIT USER GUIDE
2.3 Optional Mounting Guidelines

NOTICE
- When disconnecting components such as the power supply, Bus cable or the handset, the strain relieve hook must be pressed before removing
the connector. When inserting the connector, an audible "click" indicates that the strain relieve hook has correctly re-engaged.
DANGER
- Grounding Instruction
This product does NOT require grounding to earth. This product is double insulated and equipped with a non-polarized 120V
plug and 2-conductor cord. The plug must be plugged into an appropriate building outlet that is properly installed in accordance with
all local codes and ordinances. Please read section 4.4 as well.
DANGER
- Risk of Electrical Shock
Improper connection of the equipment can result in a risk of electric shock. Check with a qualified electrician for any concerns. Do not modify the plug provided
with the product -if it will not fit the outlet, have a proper outlet installed by a qualified electrician.
This product is designed for the voltage indicated on the power supply label. No adapters should be used with this product.
CAUTION
- Risk of Electrical Shock
Before you plug in the power cord, check the following again:
• The voltage must be as specified on the power supply label
• When the power cord is plugged in, the electrical control devices are operational

NOTICE
- in case of power failure or if the power cord is unplugged during the movement of the drives, a manual reset may be necessary! See "Section
3.2".
2.4 System Configuration (example)
The figure below shows a configuration example consisting of:
1 - Power Supply
2 - Bus Cable
3 - Handset
2.5 Adjustments
The table control, handset and motors are sealed units and have no parts that can be serviced or adjusted by the user. In case of failure/unexpected operation or
for maintenance, please contact Global Furniture Group or arrange for service by a qualified technician.
6
globalfurnituregroup.com