Global FREEFIT Installation Manual & Operating Instructions
Hide thumbs
Also See for FREEFIT:
- Installation manual & operating instructions (38 pages) ,
- Installation manual (19 pages) ,
- User manual (11 pages)
Advertisement
Quick Links
Advertisement
Related Manuals for Global FREEFIT
Summary of Contents for Global FREEFIT
- Page 1 Revised January 2019...
- Page 2 Adaptor bled in 5 minutes or less VERSION 2 03/18/10 Please contact your Global Contract Service Representative at 416-739-5000 for any questions or concerns. NOTE: Any alterations to listed components will void the manufacturer’s warranty. turer’s specifications. In accordance with the manufacturer’s policy of continual...
- Page 3 GLOBAL Contract • August 2014 INSTALLATION GUIDELINES FREEFIT INSTALLATION GUIDE Feet Assemble the feet on the columns. Tighten screws firmly. IMPORTANT: Make sure the correct screws are used. Using too long screws may destroy internal parts in the column. Screw Socket Round UNC 5/16- 18x5/8” Zn Crossbars Loosen screws to adjust crossbar length.
- Page 4 Contract GLOBAL • August 2014 INSTALLATION GUIDELINES FREEFIT INSTALLATION GUIDE Sidebars Fasten sidebars in threaded holes on top of crossbars with countersunk screws. Various types of sidebars exist, some of which can be placed in optional positions. The holes closest to the ends of the sidebar are dedicated for fixing of work top but any available hole can be used for this purpose.
- Page 5 GLOBAL Contract • August 2014 FREEFIT INSTALLATION GUIDE 3-Column 90° Telescopic Crossbars Attach the crossbars on the long side of the housings. Tighten screws firmly. IMPORTANT: Do not use the two middle holes of the crossbars. Do not insert any object in the two middle holes as this Screw socket CSK can damage electronic components.
-
Page 6: Electrical 2-Column
FREEFIT INSTALLATION GUIDE Electrical 2-Column The handset is mounted at the front edge of the work top, screwed to the underside with screws supplied with the unit. Connect cables and power supply according to Power Supply Cable USA 2-pol IEC C7... - Page 7 GLOBAL Contract • August 2014 • January 2015 FREEFIT INSTALLATION GUIDE Handset Installation Hand Wheel Joggle Manual Use the 2 included screws for fixing to the tabletop. If the thickness Use the 2 attached screws for fixing to the ta-ble top. If the thick- of the tabletop is less than 1”, please use shorter screws.
- Page 8 GLOBAL Contract • August 2014 FREEFIT INSTALLATION GUIDE Using Controls Wheel Controls How to set memory: Upper limit: Units: Upper Limit Lower Limit Calibrate Run/Drive the table to the position you will store, Set the upper limit if there are limited Choose between metric or imperial sitting or standing.