Download Print this page

Global Freefit User Manual page 3

Advertisement

1.1 Important Safety Instructions - please save these instructions.
When using an electrical table, basic precautions should always be followed, including the following:
Read all instructions before using the table.
DANGER
- To reduce the risk of electric shock:
1.
Always unplug this furnishing from the electrical outlet before cleaning.
WARNING
- To reduce the risk of burns, fire, electric shock, or injury to persons:
1.
Unplug from outlet before putting on or taking off parts
2.
This table is not intended for use by children or individuals with a physical or other impairment, which may affect the ability to safely operate
equipment.
3.
Use this table only for its intended use as described in these instructions. Do not use attachments not recommended by the manufacturer.
4.
Never operate this table if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or exposed to water. In
such event, please return the table to a service center for examination and repair.
5.
Keep the cord away from heated surfaces.
6.
Never operate the table with the air openings blocked. Keep the air openings free of lint, hair and the like.
7.
Never drop or insert any object into any opening.
8.
Do not use outdoors.
9.
Do not operate the table in a potentially explosive atmosphere.
10.
To disconnect, turn all controls to the off position, then remove plug from outlet.
WARNING
- Risk of Electric Shock:
1.
Connect this table to a proper outlet only. For loading always put heavier items at the bottom and not at the top in order to help prevent the
possibility of the furnishing tipping over.
WARNING
- Risk of Injury to Persons:
1.
Do not use this table to lift people and do not use this table to lift heavy parts or use this table as a platform for storage.
2.
Maximum intended load is 265 pounds, uniformly distributed (120 kilograms) including the table top.
DANGER
- Risk of Electric Shock, Injury or Death:
1.
Improper usage, abuse, or misuse of the power supply, handset, motors and other electrical components may result in an electrical shock injury or
possible death.
2.
Do not open the power supply unit or handset under any circumstances. The power supply and handset contain no serviceable parts.
3.
Do not modify or make any changes to the power supply, handset or other electrical devices.
4.
During installation, repair, cleaning, or maintenance work, the power cable must be disconnected from the outlet.
5.
The motor control unit is not designed for continuous operation. Changing the desktop position without interruption must not exceed the duty cycle
indicated on the power supply. The unit is thermally protected and will temporarily shut down if use exceeds the duty cycle. Allow a 9 minute
cooling period for the control unit to reset.
6.
The power supply unit may only be operated with voltage as specified on the power supply label.
7.
Only use the power cord supplied with the power supply. Check that it is not damaged. Do not operate the power supply unit if the cord is damaged.
8.
Connect the power supply to a proper outlet only. To disconnect, turn all controls to the office position, then remove plug from outlet.
9.
In the event of a malfunction (e.g. if the control unit keeps adjusting the desk because a movement button has jammed), please unplug the unit
immediately.
10.
Do not expose the power supply, handset or other electrical device to water or other liquids including moisture, drips, splashes, or spills. Only clean
electrical device with a dry cloth.
11.
Do not operate the power supply, handset, or other electrical device in a potentially explosive atmosphere. Do not operate where aerosol spray
products are being used or where oxygen is being administered.
12.
Do not use the desk if it has been dropped or damaged. Contact the manufacturer for examination or repair.
13.
It is not allowed to connect self-constructed products to the power supply, handset, or other electrical device. To prevent damage, use only
components recommended by the manufacturing company.
globalfurnituregroup.com
FREEFIT USER GUIDE
3

Advertisement

loading