Download Print this page
Panamax BlueBOLT MD2-ZB Installation Instructions

Panamax BlueBOLT MD2-ZB Installation Instructions

Surge protector with wireless communication

Advertisement

Quick Links

OPTIONS FOR MOUNTING & FRONT COVER FACEPLATE
Cover of MD2-ZB can easily be removed by
pulling off cover at the two side indents (1).
2
Unit can be securely screwed into wall outlet
faceplate using either hole (2) indicated (screw
is included).

SPECIFICATIONS

Electrical Ratings
Line Voltage ______ 120 Vac, 60Hz
Current Rating _____ 12 A
Voltage Protection Rating (UL 1449 3rd Edition,
3,000A) _________ 400V L-N, 500V L-G,
400V N-G
Nominal Discharge Current (UL1449 3rd Edi-
tion _____________3,000A
Electrical Measurements
RMS Voltage ______ 1% precision
RMS Current ______ 1% precision
Power___________ 2% precision
Cumulative Energy__ 2% precision
AGENCY APPROVALS
CCSAUS Certified: UL1449 3rd Edition
(Type 3 SPD), CSA C22.2 No. 42
UL 1449 Voltage Protection Rating:
400V L-N, 500V L-G, 400V N-G
C
www.panamax.com
www.mybluebolt.com
Cover can be flipped around 180 degrees to
hide LEDs from front straight-on view if desired.
1
Cover can be removed & painted to match color
of wall. Do not paint the sides, top or bottom.
Warranty will be voided.
RF / ZigBee
ZigBee®/802.15.4 Radio
2.405-2.475 GHz, unlicensed ISM band
3dBm transmitter output
-99dBm receiver sensitivity
General
Weight__________ 0.7lb
Dimensions_______ 3.25 in. W X 1.625 in.
D X 5.25 in. H
WARRANTY POLICIES
Product Warranty: Limited 3 Year Warranty
Connected Equipment Protection Policy:
Limited $100,000
Connected Equipment Policy
US
www.furmansound.com
INSTALLATION INSTRUCTIONS MD2-ZB
POWER STATUS INDICATOR LIGHTS
Outlet 1
Network
Connection Status
OUTLET 1
Left side.
Ground Pin Out.
REMOVABLE COVER
FACEPLATE
Finger Indent to Pull Off
Cover.
This device complies with part 15
of the FCC Rules. Operation is subject
to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device in
accordance with the specifications of Part 15 of FCC rules. These specifications are designed to
provide reasonable protection against such interference win a residential installation.
However, there is no guarantee that interference will not occur in a particular installation.
In accordance with FCC 15.21, changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the equipment.
www.panamax.com
www.mybluebolt.com
PUSH BUTTONS
For Outlet's Power ON/OFF and Network Connection
INDICATOR LIGHTS
Outlet 2
Wiring Fault
OUTLET 2
Right side.
Ground Pin Down.
MD2-ZB
www.furmansound.com

Advertisement

loading

Summary of Contents for Panamax BlueBOLT MD2-ZB

  • Page 1: Specifications

    In accordance with FCC 15.21, changes or modifications not expressly approved by the party 400V L-N, 500V L-G, 400V N-G Connected Equipment Policy responsible for compliance could void the user’s authority to operate the equipment. www.panamax.com www.mybluebolt.com www.furmansound.com www.panamax.com www.mybluebolt.com...
  • Page 2 INSTALLATION Plug your equipment into the AC outlets. Turn OFF the equipment that you are Through the BlueBOLT interface, Blue B LT ® plugging into the MD2-ZB NETWORK CONNECT enable NETWORK JOINING. Refer to the user manual for BB-ZIGBEE for detailed Blue B LT ®...