Setting The Clock - Sony LBT-N350 Operating Instructions Manual

Setting the Clock

The built-in clock shows the time in the
display.
1 2,4
1
Keep pressing CLOCK SET until the
hour indicator begins flashing.
GB
6
flashing
2
Set the current hour by pressing
(CURSOR CONTROL) until the correct
hour appears.
flashing
3
Press ENTER/NEXT .
The minutes indicator begins flashing.
flashing
4
Set the current minute by pressing
until the correct minute appears.
flashing
Chapter 1: Setting Up
5
Press ENTER/NEXT.
Use the time signal to set the clock
accurately.
"OK" appears in the display and the
clock starts running.
3,5
To check the time while power is on
Press DISPLAY.
DISPLAY
The current time appears for a few seconds.
To correct the clock setting
Repeat steps 1 to 5.
or
or