Recording A Cd: Specifying Track Order (Programme Edit); Recording From The Radio - Sony LBT-N350 Operating Instructions Manual

continued
8
Press EDIT.
The player determines the tracks to be
recorded on side A automatically .
Tracks to be recorded on side A
Total playing time on side A
1 2
flashing
9
When you record on both sides, press
EDIT again.
The player determines the tracks to be
recorded on side B.
Tracks to be recorded
on both sides
1 2
63 125 250 500 1k 2k 4k 8k 16k (Hz)
Last track
Total playing time
on side B
10
GB
Press CD SYNCHRO.
The REC and (pause) lamps light
16
and deck B stands by for recording.
The lamp lights and the
flashes for a few seconds, then
disappears.
If you want to start recording from the
reverse side, press
lamp lights steadily.
11
Press to release recording pause.
Recording starts.
After about 10 seconds, the CD starts
playing. If the last track on side A has
abruptly been cut, the track will record
again from the beginning on side B
when you choose dual-sided recording.
If you set DIRECTION MODE to
RELAY, recording always stops at the
end of the reverse side.
To stop recording
Press .
To check the order
Press CHECK repeatedly.
To select the desired tracks
beforehand
You can place priority on some tracks to be
recorded by selecting them before
programming them up to 20 tracks. See
"Playing Tracks in the Desired Order
(programme play)".
If you have programmed a track number
which exceeds 20, you cannot use this
feature.
Chapter 5: the Tape Player
To cancel time edit
Press CONTINUE.
Recording a CD:
Specifying Track Order
DOLBY NR
DBFB
OFF
1 2 3 4
3 4 5 VOLUME
6
(programme edit)
DISC PROGRAM
You can adjust the total recording time to
the tape length while making a programme.
DOLBY NR DBFB
OFF
1 2 3 4 5
3 4 5
VOLUME
6 7 8 9 10
11
PROGRAM
DISC
lamp
Side in recording
pause mode
so that the
1
Following the procedure "Playing
Tracks in the Desired Order
(programme play)", programme the
tracks you want to record for side A.
or
Make sure to programme the tracks so
that the total playing time of side A does
not exceed the tape length of one side.
2
Press
"P" appears in the display and the total
playing time is reset to 0.
3
Programme the tracks you want to
record for side B in the same way as you
did for side A.
4
Press
into deck B with the side you want to
record on facing forward.
Recording will start from the front side
of the tape, unless you have changed the
playing direction before recording.
Make sure the tabs on the cassette have
not been removed.
SYSTEM
POWER –ON
CONTINUE
.
EJECT and insert a blank tape
5
Select dual or single-sided recording.
To record
One side
Both sides
6
When you want to reduce the hiss noise
in low-level high-frequency signals, set
DOLBY NR to ON.
7
Press CD SYNCHRO.
The REC and
and deck B stands by for recording.
The lamp lights and the
flashes for a few seconds, then
disappears.
7
If you want to start recording from the
2,8
reverse side, press
5 lamp lights steadily.
6
8
Press to release recording pause.
4
Recording starts.
After about 10 seconds, the CD starts
playing. If the last track on side A has
abruptly been cut, the track will record
again from the beginning on side B
when you choose dual-sided recording.
If you set DIRECTION MODE to
RELAY, recording always stops at the
end of the reverse side.
To stop recording
Press .
To cancel programme edit
Press CONTINUE.
Recording From the
Radio
You can record from the tuner onto a tape.
Use TYPE (normal) or TYPE
tape.
SYSTEM
POWER –ON
Set DIRECTION
MODE to
or RELAY
(pause) lamps light
lamp
Side in recording
pause mode
so that the
or
(CrO )
2
1
6
7
4
5
3