Table of Contents
Advertisement
Problem
The GPS application cannot find my
location.
No sound is produced.
I cannot project the tablet computer
display to another monitor.
Barcode scanner does not emit laser
beam and does not seem to work.
Barcode Scanner emits laser beam but
does not read barcode presented to it.
I am having GPS accuracy issue
Make sure that GPS is powered on in
Hottab.
Make sure that GPS receiver and the
location sensor are enabled in Control
Panel.
The tablet computer may be out of
coverage area. Move your tablet computer
outdoors or closer to a window.
Check if your surroundings have
interferences, such as microwave ovens,
cordless phones. Move the tablet computer
away from objects causing interference.
Adjust volume of the tablet computer by
pressing on the volume rocker.
If using an external audio device, make
sure that the cable is properly connected.
Make sure the VGA driver is installed.
Make sure the output setting selected is
correct.
Make sure the Barcode scanner device is
enabled in Hottab utility.
Make sure under Windows, the Barcode
Reader is set to COM 15 port, so that
Hottab can trigger the Barcode Reader
hardware.
Adjust the distance between barcode
scanner of the device and the barcode
being scanned.
Make sure the barcode code type is
enabled in the tablet. To enable/disable a
specific barcode code type, go through the
"Barcode Scanner Configuration" section.
When utilizing the GPS function, we
recommend disabling the Barcode Reader
in Hottab to reduce interference.
Solution
Advertisement
Table of Contents
