Anet A8 Plus User Manual page 23

2.Disable steppers operation: Press the rotary button to enter the main menu, select"Prepare"→"Disable
steppers".
3.Manual leveling：Move the nozzle to the heating bed, and observe the distance between the nozzle and the
heating bed from the front of the machine. If the distance between the nozzle and the four corners of the
heating bed is 0.1mm (the thickness of a piece of A4 paper, A4 paper can pass through the gap and feel
slight resistance), leveling is not required. If the distance between the nozzle and the four corners of
the heating bed is greater than or less than 0.1mm, adjust according to step 4.
The distance between the nozzle
and heating bed
page23of30