Smart Horizontal Mode; Height Tracking - Leica DISTO X310 How To Use Manual

Triangular Area Measurement
*Total linear distance (circumference) of the area calculated
Once you have calculated the triangular area of a wall/floor you can long press the
for 2 seconds to view the circumference of that triangular wall/floor
the total of all 3 sides, the angle included by the first 2 measurements

Smart Horizontal Mode™

A wonderful application to measure the horizontal distance even with an obstruction in the
way.
*Along with the horizontal distance this application also records angle of the tilt, length of
the tilt and the vertical height from the device.

Height Tracking

This function allows you to continuously track the height from a certain fixed point based
on changing angles as you move the device head reference.
*This application needs tripod.
 For measuring the area of a triangular surface, press the Function
key thrice and you reach the triangular area measurement
application .
 This is quite similar to previous area and volume measurement
functions. Measure all three sides of a triangular area aiming lasers
at 1 , 2 and 3
st nd rd
 Once this process is completed the device automatically calculates
the area for you.
 Press the
key given in the center of the X310 device to activate the
application.
 And shoot the laser at an angle of certain tilt and record the
measurement pressing
 The device automatically calculates the horizontal distance from the
target.
 Press the
twice to reach the height tracking application which is
displayed on the screen as .
 Aim the laser at the lowest point of the target for which the height is
to be tracked and record the measurement by pressing
 This starts height tracking automatically.
 Now gradually and continously keep aiming the laser at upper points
and angles recording the desired readings.
 Press
again to stop height tracking.
target points pressing
.
key.
. And along with
.
.
key