Epever XTRA N Series User Manual page 19

3)Load parameter dispaly
Display：Current/Consumed energy/Load working mode-Timer1/ Load working
mode-Timer2
4)Setting
① Clear the generated energy
Operation:
Step 1: Press the
interface and the value will be flashing.
Step 2: Press the
② Switch the battery temperature unit
Press the
③Battery type
Operation:
Step1: Press the
Step2: Press the
Step3: Press the
CAUTION：Please refer to chapter 4.1 for the battery control voltage
setting, when the battery type is User.
④Load working mode
button and hold 5s under the PV generated energy
button to clear the generated energy.
button and hold 5s under the battery temperature interface.
button and hold 5s under the battery voltage interface.
button when the battery type interface is flashing.
button to confirm the battery type.
16