Setting The Air Distribution - Mercedes-Benz GLE COUPE Operator's Manual

Setting the temperature
Dual-zone automatic climate control
Different temperatures can be set for the driv-
er's and front-passenger sides.
Turn the SmartKey to position 2 in the ignition
X
lock ( page 125).
Y
To increase or decrease: turn control : or
X
B counter-clockwise or clockwise
( page 113).
Y
Only change the temperature setting in small
increments. Start at 72 ‡ (22 †).
3-zone automatic climate control
You can select different temperature settings
for the driver's and front-passenger sides as well
as for the rear compartment.
Turn the SmartKey to position 2 in the ignition
X
lock ( page 125).
Y
To increase or decrease temperature in
X
the front compartment: turn control : or
B counter-clockwise or clockwise
( page 115).
Y
Only change the temperature setting in small
increments. Start at 72 ‡ (22 †).
To increase or reduce the temperature in
X
the rear compartment using the front con-
trol panel:press the á button.
The indicator lamp in the á button goes
out.
The temperature setting for the driver's side
is adopted for the rear compartment and the
front-passenger side.
Turn thumbwheel : to the left or right
X
( page 115).
Y
Only change the temperature setting in small
increments. Start at 72 ‡ (22 †).
To increase or decrease the rear compart-
X
ment temperature using the rear control
panel: turn control M counter-clockwise or
clockwise on the rear control panel
( page 115).
Y
Only change the temperature setting in small
increments. Start at 72 ‡ (22 †).
Operating the climate control systems

Setting the air distribution

Air distribution settings
Front control panel
P Directs the airflow through the center
vents
O Directs air through the footwell air vents
S Directs the airflow through the center
and footwell vents
¯ Directs air through the defroster vents
b Directs the airflow through the defroster
and center vents (Canada only)
a Directs air through the defroster and
footwell vents
_ Directs the airflow through the defroster,
center and footwell air vents (Canada
only)
Rear control panel
M Directs the airflow through the rear cen-
ter and B-pillar air vents
O Directs air through the footwell air vents
i
Using the rear control panel, you can also
activate both air distribution positions simul-
taneously. In order to do this, press both air
distribution buttons. The air is then routed
through all rear air vents.
i
Regardless of the air distribution setting,
airflow is always directed through the side air
vents. The side air vents can only be closed
when the controls on the side air vents are
turned downwards.
Adjusting
Turn the SmartKey to position 2 in the ignition
X
lock ( page 125).
Y
Press the _ button repeatedly until the
X
desired symbol appears in the display.
Setting the airflow
Turn the SmartKey to position 2 in the ignition
X
lock ( page 125).
Y
To increase: press the K button.
X
To reduce: press the I button.
X
119