Philips MML1941-PCR User Manual page 36

AIC (Ambient Light Compensation 000 – 300 lux)
1) Touch Enter button when the AIC is highlighted on Advanced Menu.
The AIC window appears:
2) Touch the Adjust + or Adjust - button until the desired value appears.
3) Touch the Enter button to confirm your selection.
4) Touch the Adjust + or Adjust - button to exit or to select another item
Note: Phase Adjust, Clock Adjust, Auto Clock, Auto Phase, Video
Calibration, Restore Factory are valid only in analog video source. (DSub
and DVI-A)
Baud Rate
1) Touch Enter button when the Baud Rate is highlighted on Advanced
Menu.
The Baud Rate window appears:
2) Touch the Adjust + or Adjust - button until the desired value appears.
3) Touch the Enter button to confirm your selection.
4) Touch the Adjust + or Adjust - button to exit or to select another item
5 Volt - DVI
1) Touch Enter button when the 5 Volt - DVI is highlighted on Advanced
Menu.
The 5 Volt - DVI window appears:
The ON SCREEN DISPLAY shows the following available choices:
- On 5 Volt is supplied on DVI conn. (pin 16)
- Off
No power available on DVI conn. (pin 16)
2) Touch the Adjust + or Adjust - button until the desired value appears.
3) Touch the Enter button to confirm your selection.
4) Touch the Adjust + or Adjust - button to exit or to select another item
36 MML194x