Lut; Black Value; Color Emulation - Philips MML1941-PCR User Manual

LUT

1) Touch Enter button when the LUT is highlighted on Image Adjust
Menu.
The LUT window appears:
The ON SCREEN DISPLAY shows the following available choices, you
can select:
- Linear The Transfer Function is transparent
- Dicom The output curve follows the DICOM curve
- CAL. TG3 – PMS The output curve is the same as PMS
standard monitor. (Calibrated curve)
2) Touch the Adjust + or Adjust - button until the desired value appears.
3) Touch the Enter button to confirm your selection.
4) Touch the Adjust + or Adjust - button to exit or to select another item
Note: The selection of the color LUT works for all modes except for SOG
video formats.

Black Value

1) Touch Enter button when the Black Value is highlighted on Image
Adjust Menu.
The Black Value window appears:
The ON SCREEN DISPLAY shows the following available choices, you
can select:
- Native The first entry of the LUT is empty
- User The value of the first entry of the LUT is the one
passed using the proper RS232 command
2) Touch the Adjust + or Adjust - button until the desired value appears.
3) Touch the Enter button to confirm your selection.
4) Touch the Adjust + or Adjust - button to exit or to select another item

Color Emulation

1) Touch Enter button when the Color Emulation is highlighted on
Image Adjust Menu.
The Color Emulation window appears:
The ON SCREEN DISPLAY shows the following available choices:
- Disabled
- Enabled
2) Touch the Adjust + or Adjust - button until the desired value appears.
3) Touch the Enter button to confirm your selection.
4) Touch the Adjust + or Adjust - button to exit or to select another item
MML194x 31